Large-scale farmers use poultry farming equipment to raise chickens. Large farms need manure removal equipment. This can solve the problem efficiently and quickly.
The types of manure removal equipment are 1. scraper manure removal 2. flat belt manure removal 3. push-pull drawer type manure removal.The method of scraping manure is simple, easy to implement and economical. In the past, many farmers used it in production, but there were also many problems in the application.
Disadvantages of using Scraper type manure removal equipment:
1. The scraping speed is slow, which will cause the environment in the house to change instantly. The normal scraper walks 2m?3m per minute, and the scraping time will be longer if the following conditions are encountered: the chicken house is too long. the wheel groove of the reducer is worn and widened; The board is too light; the ditch is not straight and uneven, etc.
2. The manure is thicker or there are more feathers in the manure of young chickens and it is difficult to scrape.The manure remains fermented, and the harmful gas exceeds the standard when scraping the manure.
3. Due to the large drop above and below the ladder cage, the feces are stressed when the chicken is defecation, the outer membrane is ruptured, and the shape of all the feces in the house is completely deformed when the feces are scraped, and the outer membrane is completely completely Damaged, and then the moisture is completely released, causing ammonia and moisture to increase, which will affect production.
4. Due to the exposure of the winch and rope of the manure scraper, there is a great safety hazard, which affects the health and lives of the breeders.
Advantages of crawler cleaning manure:
1. The crawler cleaning method is mostly used in high-density stacked caged chicken houses. It is also suitable for chicken manure treatment in the process of raising chickens in ladder-type mechanized cages. The entire manure removal system has high cleanliness, which can greatly and effectively reduce the concentration of harmful gases in the house. Relatively reduce the amount of ventilation in the house, reduce energy consumption and extend the service life of the fan. As a result, the temperature of the chicken house can also be increased to reduce the energy consumption of the chickens. Improve chicken production performance; chicken manure is relatively dry, easy to handle and deep processing, and work efficiency is improved.
2. The track material is made of high-strength PVC, composite polyethylene, etc. The belt body is about 2000mm wide and about 0.6-1.1mm thick. It adopts ultrasonic oblique welding, has a certain strength and toughness, does not absorb water, does not deform, and walks every minute. 8m?10m.
3. A set of vertical manure removal crawlers are installed in each row or layer of chicken cages, and each chicken house is equipped with one horizontal and diagonal manure removal crawlers; the vertical crawlers convey the chicken manure to the horizontal end crawler after the chicken house, and then pass it by. Send the oblique crawler outside the house to the vehicle or other devices. The crawler manure removal power and control system are located at the rear end of the chicken house for easy operation and maintenance.
4. Compared with the cost of building a manure ditch and purchasing a manure scraper in a newly built chicken house, the value-added of chicken manure, the saving of ventilation and electricity consumption and material consumption; and the improvement of the environment in the house, the reduction of disease and other factors, it is necessary to reform the scraper to clean manure.
Through actual use in recent years, the effect of crawler manure removal is obvious, the performance of chicken production has been steadily improved, and the comprehensive economic benefits are considerable.
